Labs / Routing
Road 4 of 33
Routing
How packets cross networks: routes by hand, routing protocols, and BGP between providers.
Start this roadRoutes by hand
Routers, routing tables and backup routes.
- 01 Default gateways: why a machine reaches its neighbor and nothing else Give a machine its way out of the network, and the reply its way back.
- 02 Routing tables: how a router picks one line out of many Read a routing table, and predict which line each packet follows.
- 03 Static routes: a backup link that waits, and the failure it can't see Set routes that survive a reboot, add a backup, and find what it misses.
- 04 DHCP relaying: one address server for every hall Carry a broadcast across a router, so one server feeds every network.
Routing protocols
Routers teaching each other with RIP and OSPF.
Provider routing
VRFs, BGP, MPLS and SD-WAN.
- 01 BGP routing: how the internet's networks find each other Announce your block to the world, then see how little anyone checks.
- 02 BGP policies: steering traffic and refusing bad routes Choose where your traffic flows, then refuse routes nobody should believe.
- 03 VRF: one router, several routing tables Split one router into several, so tenants never meet.
- 04 MPLS: a core that never reads the address Carry customers' packets across routers that hold no route for them.
- 05 SD-WAN: every application on the right line Steer each application over the better of two lines, from one controller.