Labs / IP Addressing & NAT
Road 3 of 33
IP Addressing & NAT
Subnets, sharing one public address with NAT, and IPv6.
Start this roadAddresses and subnets
Private addresses, masks, cutting blocks to size, and joining them.
- 01 Public and private IP addresses: how two homes use one address Open one address in two homes, then find the address a website sees.
- 02 Subnet masks: why a machine on the same switch is out of reach Find the setting that decides who a machine counts as a neighbor.
- 03 Subnetting: cut one network into four to protect an exam paper Subnetting practice: split one network into subnets, then stop students at the router.
- 04 CIDR and VLSM: fit a whole hotel into one block of addresses Cut one block of addresses into subnets of different sizes, with CIDR and VLSM.
- 05 Supernetting: turn a list of routes into one line Join neighboring blocks into one route, and stop the loop a summary can cause.
NAT
Sharing one public address.
- 01 NAT: share one public address across a whole building Hide a network behind one public address, and see how replies find the way back.
- 02 Port forwarding: let the internet reach one machine behind NAT Open one port on a NAT router so outsiders can reach a machine inside.
- 03 NAT explained: static, dynamic and PAT on one router Build static NAT, a pool and overload on one router, and see what each costs.
- 04 NAT traversal: punch a hole between two NATs Open a direct path between two machines behind NAT, with no port forward.
IPv6
The next version of IP.
- 01 IPv6 explained: a network that sets itself up See how IPv6 machines build their own addresses and reach the internet without NAT.
- 02 IPv6 addressing: read, shorten and split any address Read IPv6 addresses at a glance, split a block and see who hands them out.
- 03 IPv6 dual stack: run both and see which one wins Run IPv4 and IPv6 side by side, see which one wins and what breaks.