Cheat sheet
iptables and nftables cheat sheet
Linux firewall and NAT rules on one page: iptables, nft and conntrack.
iptables
Lists and changes the kernel's firewall and NAT rules, with a counter on each rule of what it matched.
iptables -L -n -v- Lists every filter rule with how many packets and bytes each matched.
iptables -S FORWARD- Prints the FORWARD chain as the commands that would recreate it.
iptables -A FORWARD -i officeNetwork -s 10.0.1.40 -j DROP- A standard access list line: drops whatever 10.0.1.40 sends in on the office card (a card named after its network).
iptables -R FORWARD 2 -o serverNetwork -s 10.0.1.40 -j DROP- Replaces line 2 with the same deny, checked out on the server card instead.
iptables -t nat -L -n -v --line-numbers- Lists the NAT rules, numbered, with their counters.
iptables -I INPUT -p tcp --dport 22 -j DROP- Drops every SSH connection to this device, silently.
iptables -I FORWARD -d 10.0.2.10 -p tcp --dport 80 -j REJECT --reject-with tcp-reset- Refuses forwarded web connections to 10.0.2.10 with a TCP reset.
iptables -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT- Lets replies to connections already allowed through: the heart of a stateful firewall.
nft
Lists and changes nftables rules, sets and counters, the successor of iptables; also filters frames on a bridge.
nft list set bridge netlab-security dhcp-bindings- Shows the switch's DHCP snooping bindings: port, IP and MAC of each lease, with the time left.
nft list counter bridge netlab-security arp-inspection- Shows how many ARP frames ARP inspection has dropped.
nft list set bridge netlab-security port-security-victim- Shows the secure MAC addresses port victim has learned.
nft flush set bridge netlab-security port-security-victim- Forgets the port's secure addresses, as Cisco's clear port-security.
nft list ruleset- Prints every table, chain and rule: the whole firewall.
nft -a list ruleset- Prints the ruleset with each rule's handle, the number you delete it by.
nft add table inet filter- Makes a table for IPv4 and IPv6 together (the inet family).
nft add chain inet filter input '{ type filter hook input priority 0; policy drop; }'- Makes an input chain that sees packets for this device and drops whatever no rule accepts.
conntrack
Lists and edits the kernel's table of tracked flows: what a stateful firewall and NAT remember.
conntrack -L -p udp- Lists the UDP flows the router tracks, with their NAT mappings and timers.
conntrack -L -p tcp- Lists the TCP connections, each with its four addresses: as sent, and as the reply must look.
conntrack -D -p udp -s 10.0.2.10- Forgets one device's UDP flows, so its next packets are mapped under the current rules.
cat /proc/net/nf_conntrack- The same table without the tool.